<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Hi Paul,
<br>
<p>Sending this AP error to you. Im on version <b>20b36</b> [I was just
about to install 20b37]
<br>
<p><b><u>Sequence:</u></b>
<ul>
<li>
Open AP</li>
<li>
Select <b>run as Unregistered</b></li>
<li>
Connect to scope</li>
<li>
Select list item</li>
<li>
Choose "<b>Slew To Object</b>"</li>
<li>
While slew is in progress, Exit from AP by choosing window control - upper
right <img SRC="cid:part1.4A05F647.9717523C@earthlink.net" height=32 width=33></li>
<li>
AP ignores first click [as usual]</li>
<li>
Click on "X" second time, AP begins to exit</li>
<li>
Windows pops-up <b>Runtime Error</b> notice:</li>
<br><img SRC="cid:part2.4A05F647.9717523C@earthlink.net" height=230 width=635></ul>
<ul>
<li>
This entire session was less than 2 minutes.</li>
<li>
The error doesn't re-occur reliably.</li>
</ul>
<p><br>After checking my notes, I realize I've reported this same Runtime
Error once before, on a previous AP version [20b33]. However, I think the
sequence was different.
<br>
<p>I have not run AP since. If you'd like me to send any log files or other
items, please respond ASAP. I'll put off running AP again or upgrading
for at least 24hrs in hopes I hear from you.
<br>
<p>Chris
<br> </html>